Sunday, 26 October 2014

...... and what to do with the abdicating queen.

When taking the old queen out I was wondering what I should do with her. I could not really get myself to just kill her and through her out, so I decided I would try to dry and exhibit her.

First I needed to kill her in a gentle way. I did not have any organic solvents at home so I just figured I would get her drunk in Bacardi :o). I put her in a glass with some beads to lift her from the Bacardi rum in bottom. It took longer than I expected and she was not dead until the next morning.


When I took out the queen she was damp and a bit curled up. The wing was sticking together so I needed to dry her in the position I wanted to exhibit her. A cork, a few pins and some precision work did the job - a pin in the neck, on each side of the body and positioning the legs and wings in a "natural" position.


Hereafter I just left her on a shelf to dry. Also, I did not have a plate to pin her to. I found a good frame in IKEA where the glass was lifted several centimeters from the picture. I found a piece of styrofoam about 1 cm thick and cut out a square which I then covered with a yellow dish washing cloth. This I could use as the surface to pin the queen too. I picked a yellow cloth because the contrast to the dark queen highlighted her details.

And voila!


Wednesday, 22 October 2014

New queen in the castle

Back to my bee hive....

After the formic acid treatment in september I had decided to change the queen in the hive. She is marked yellow which means that she from 2012. Last year the hive behaved great, but this year she had several times started to make swarm cells, i.e. cells for new queens.


If these are not removed, half the hive will swarm with either queen to a new location - typically a tree close by. This happened several time in "school hives" of the bee association that I am member of and it is quite an awesome thing to see - and to take down again.


The new queen bee that I bought is from this year 2014 and is labeled with a green mark.


 Changing queen is remarkably simple.

1. Remove the old queen and leave the hive without queen for a day. I caught one extra working bee with her which I could not get rid of.


2. Add the new queen in a place where the other bees cannot get to her and sting her to death. Leave the hive for half a day for the bees to get use to her pheromones.


3. Insert the new queen in the hive and let the bees work for her by digging her out and feeding her.


And the hive now has a new "monarch". Can you find her........ :o)


Tuesday, 21 October 2014

2014 batch 1: Cyser (4) Malolactic fermentation

Fermentation is over and the mead has been racked twice during the last 3 weeks.

The taste of the mead is pleasant but it still has a sting to it from the malic acid. For that purpose I had purchased Malolactic bacteria from White Labs (WLP 675). It is a suspension that must be kept refrigerated until use. I found instructions (HERE) where it stated that there should be about 5 Brix of residual sugar which corresponds to a gravity of 1.020. Secondly the bacteria can be propagated in apple juice (or tomato juice). Finally the bacteria has high tolerance for low pH (pH 3.0) and an optimal performance at approximately pH 4.0. The tolerance to alcohol is up to 15%. Working temperature is 21-23oC

So the conditions in my Cyser are close to PERFECT :o)

I took out the vial from the fridge 4 hours before use, shaking it periodically and then added the entire vial to the fermenter. The following day I got a few bubbles from the airlock, so the bacteria is already hard at work.


The flask to the right contains a small sample of the mead so that I can do taste tests as the malolactic fermentation progresses. I will also try to set up a TLC measurement to get a semi quantitative measurement of the progress - more on that later...


2014 batch 1: Cyser (3) Possible nutrient deficiency

My fermentation did not exactly finalize as I had hoped/expected. The rate of bubbling in the airlock just kept slowing down over a much longer period than I anticipated.

I tried to make plot of the fermentation events. I assumed that the amount of CO2 produced is proportional to the conversion going on and also proportional to the rate of bubbles from the airlock. Short time intervals corresponds to fast fermentation, so in inverted the time between bubbles and put it in % of the fastest bubble rate. For gravity I expected a drop of 0.107, so I calculated the gravity drop in percent of the expected maximum loss in gravity.

Then the plot look like this:

It is clear that after 5 days the fermentation slows day quite dramatically but it does not come to a halt immediately. Interestingly only half of the "fermentable gravity" has been used at this point. I assume that some sort of deficiency sets in - either free ammonium or potassium. The apple pulp was gone and only a clear precipitate of yeast was visible through the fermentation bucket. The liquid is about as clear as milk, so I still assume that there are plenty of amino acids available.

The mead was moved to a new fermentation bucket after 14 days to remove the bottom layer of yeast and this was repeated one week after when even more yeast had precipitated out. 

In regards to gravity I started out with an OG of 1.116 and when the fermentation stopped the gravity was 1.018, ie. a drop of 0.098. This corresponds to an ABV of about 13% using the quick formula: 
(OG-FG)/0.0075.

The fermentation started with a pH of 3.21 of the must. Now after the fermentation the pH is 3.60. This is quite good since the pH of the final mead should ideally be around 3.8. So almost there.....


Sunday, 5 October 2014

2014 batch 1: Cyser (2)

It is Sunday evening, and it is exactly 1 week ago that I added the yeast to the cyser. Now the gravity was measured to 1.044. It started at OG = 1.116, so it has already dropped 0.072.

Last year I learned from experience that fermenting to 14% ABV lowers the gravity by something pretty close to 0.100. The sweet mead yeast has a max ABV of 15% so under optimum fermentation conditions the gravity should drop about 0.107. In that case my FG should end up at about 1.009, which means that I am 0.035 from my target FG or that the fermentation has progressed 2/3 in just one week :o)

I noticed that the time between bubbles in the airlock initially was about 2 sec. Now this time has increased to about 5 sec, so the the fermentation appears to be slowing down a little.

I am hoping that the fermentation will stop abruptly during just one day. That will be indicative of good fermentation conditions until the ABV ceiling is reached. Then we will see how close my estimates will be to the actual values........

Friday, 3 October 2014

How to make a cheap and functional magnetic stirrer

In my post about this years cyser I killed my started using an old discarded magnetic stirrer, because it heated up after i had been running half a day and thereby heated my starter and knocked out the yeast. Buying a magnetic stirrer is ridiculously expensive, so I have been looking for alternatives.

I had been working on my own home made magnetic stirrer, and even though it was not quite finished and fancy looking, it was still working. I got the idea from reading www.instructables.com where I found complete instruction on how to make a magnetic stirrer (HERE). I am no wiz with electronics but this was so easy that even I could do it :o)

Getting an old computer fan is not that difficult these days since nobody wants stationary PC's which are though out all the time. Ask around and somebody will probably have PC just collecting dust and will be happy to let you through their old PC out. Just open the PC, unscrew the fan, and rib the wires out of the motherboard. Clean the fan with wet paper towels, and you now have the main ingredient.

Then you need 2 small power magnets (or neodymium magnets). I purchased mine over the net and it was quite cheap. They were 2 mm wide and 8 mm in diameter. I bought 4 just in case......

These have to be glued on to the fan opposite of each other but also with opposite polarity pointing upwards. Use super glue for the job (cyanoacrylate glue), since this is fast drying and very persistent. But you have to do it right first time.

Finally you need some wires, battery pack, on/off switch (optional), and some sort of connectors.


This is pretty much the same set-up as I found on the web. But there are a few things that are not mentioned there, but are equally important. First of all I was not able to get a cheap potentiometer so I could turn the speed up and down. Instead I just used "number of batteries" to control the speed. I quickly found that:

2 batteries - not enough power to turn the fan
3 batteries - OK speed
4 batteries - Fan is spinning way to fast

..... so I only use 3 batteries (and a clip to make up for the forth in my battery pack)

I used purchased teflon coated magnets as stirrer bars, and the magnet inside them are not as strong and the power magnets. If the stirrer magnet is too long, it cannot keep up with the fan due to water resistance. Hence the magnet size need to be matched with the battery size and speed of the fan.


The two smallest magnets work but the largest does not. Size does matter :o)

One thing I found quite interesting was that electronics and Lego use the same scale. I was surprised to find that Lego matches the screw holes of the fan so I gave my boy Julius an ice-cream in exchange for a "few" building blocks. He wasn't so sure that he came out on top in this deal.

So using 4 antennas as pins I could easily slide the fan down on these, and lock the fan in place with the more Legos. I also put some blocks in the corners so my beaker would not slide off.


And there you go - a cheap and functional magnetic stirrer.


Tuesday, 30 September 2014

Killing varoa mites - formic acid treatment

During the last month I noticed that I got higher and higher varoa mite count in the bottom plate of the hive. Just before the last harvest I counted more than 100. After the last harvest I fed the bees with inverted sugar so they had something to feed on and then it was time to treat the bees with formic acid. This is a kind of harsh treatment and lots of bees will be killed but the hive will be almost cleared for mites afterwards.


The procedure is simple. For a 12x10 box with 10 plates you need 3 ml of 60% formic acid per plate i.e. 30 ml which is sprayed out on the bottom plate with a syringe.


This is repeated 4 days in a row. The bottom plate is sprayed with formic acid preferably at night where the temperature is lower and the bees are all in the hive. In this way all bees are exposed without the concentration in the air is excessively high.  There are several other procedures but this one is simple, easy, and not other equipment is needed. 

The result is obvious already after the first day. 


... Every small black dot is a mite

After the 4th day I estimate I had killed about 1000 mites (every dark brown dot). 

I changed the cloth in the bottom plate and a week after I counted about another 1000 mites......


..... And about 500 the week after (no pic).

Hereafter I have only counted 1-3 mites. But I was surprised that I had this many mites in the hive. Fortunately the number has only been high for a few weeks so the family had not been damaged by the invasion.