Monday, 2 November 2015

Shopping for a conical fermenter

I have for a long time been looking at a conical fermentor as this would be an alternative to racking the mead again and again. I have been looking at several brands. Basically, I do not trust that the Chinese fermenters are food grade stainless steel, even though they are specified as such, so these was fairly fast out of the equation.

I was also looking at Blichmann's but these are really expensive. They might be great but right now I am not sure if this is the way to go for me.

Over the last year I fell head over heals for the fermentor from Ss Brewtech, but these were not sold outside the US.

As time went by I found that a new home brewing shop opened very close to were I live named Humlecentralen (HERE) - and what do you know - he sold equipment from Ss Brewtech. I was thrilled.

So now I have the Chronical half barrel fermentor equipped with FTSS temperature control - and it is just so sexy..... :). Even Alexander think it is a great toy


I also purchased the leg extensions which I can only highly recommend, because the bottom valve is really positioned low so unless you open directly to a drain you cannot get a tray underneath it unless the fermenter is lifted.

Now that a stainless steel fermenter has entered the scene I also got chemicals for cleaning (TSP) and passivation (StarSan), as recommended by Ss Brewtech.

TSP (tri-sodium-phosphate) is a relatively strong base that is used for cleaning the fermenter. This is done by scrubbing the surfaces with a soft sponge wetted in a TSP solution.

After the cleaning the fermenter is passivated with StarSan which is a solution of phosphoric acid (~50%) which passivates, dodecyl-benzene-sulphonic acid which is a foaming agent (5-15%) and some antibacterial component(s) which is hush hush (proprietary according to the MSDS)

This is the mild version of the passivation process I know from work which is sodium hydroxide wash followed by a nitric acid passivation bath..... Not really a process you want to fiddle with at home in your kitchen

Looking so much forward to try it out

Death in the family

It has been a while since my last post. My mother was very sick during the spring with pancreas cancer. It is a horrible type of cancer and there is almost nothing you can do to stop or slow it down, and she passed away this June.

With funeral, clearing and selling the house and ending all ongoing arrangements in her life and just dealing with the loss, I have not been doing much about brewing of mead, and of cause not posted anything on this blog.

Now that some time has passed, and most of all the things I had to deal with have been finalized, things are getting back to what can reasonably be called normal.

May she rest in peace!

Pic is from December 2014 when my mother and I when to a fish spa for some mother and son quality time. She died 6 month later

All I can say is that whenever you have an opportunity to give money for cancer research, do not hesitate to donate.



Monday, 11 May 2015

2014 batch 3: Bochet (9) - Bottling the Blackberry Bochet

So, when I cannot bottle my currant mead, I will just start bottle the Blackberry Bochet instead.

Same procedure. Washing bottles.

This "Double Blast" bottle cleaner is worth its weight in gold. Also the "Fast Rack" frame in the back fits perfectly for my choice of bottles. The bottles were also sprayed with Star San and then rinsed again.

Alle the gear was lined up


All clean and ready

The bottles were filled with my trusted siphon. Unfortunately I did not get a picture.

Placing the black heat shrink capsules on top of each 0.5L bottle. This is also a presentable way of hiding the silver colored screw cap :o)


Shrink the capsules in slow boiling water. A quick dip in the water is enough to get the tight seal. Just remember to use a glove to protect the hand, and a tool to hold the capsule in place. I am very fond of my bent knife - works very well.


The bottles were cleaned to get rid of spots and finger prints. Then the bottles were labeled. Using my primitive set-up to put the label in the same position, just adds a more appealing look to the bottle.


and voila!

2014 batch 2: Currant mead (14) - Still does not clear up

I was actually planning on bottling my currant mead but it does not clear up. So I started shopping for equipment to try filtering the mead

I will try to push the mead over the filter using vacuum on the collector side rather than pressurizing the mead. to push it through the filter. The idea is that it would be less risky to remove air/CO2 from the mead by vacuum rather than increasing the amount of air (+ air pollutants) by pressuring the mead

The inspiration I got from YouTube. Here is part 1:
And here is part 2:


I like the concept of filtrating the mead rather than using clearing agents. For removing particulate matter you can use 5µm or 3µm filter. Using 1 or 2 µm filters will remove yeast cells. Finaly, for sterilization you can use a 0.45 or 0.22µm filter will also remove bacteria cells too.

What you use will depend on what you wish to remove, and how much material you expect to remove, and how will you want to remove it. Smaller pore sizes will result in higher back pressure, and as the material is trapped in the filter the pressure/vaccum needed to move the mead through the filter must be increased.

I have no issues with un-wanted organism, so I will go for just removing particulate matter, and/or yeast cells - but it depends on which filters I can get my hands on. :o)

I have started shopping for the process. It is quite amazing what you can get on ebay and aliexpress from China for hardly any money when it comes to electronics and wires etc. :o)

Tuesday, 21 April 2015

First major check on the hive

Sunday the 17th of April was a great day with plenty of sun and only a little wind. I can really feel the summer coming. So today will be the first major check on the hive.

But first things first. I did not get a chance to disinfect my equipment during the fall last year so this had to be done first.

All boxes was scraped to get as much propolis off and then it was all sprayed with Virkon S which do its work and then decompose afterwards. So all I had to do was spray and leave to dry.


All minor equipment was soaked in household ethanol for several hours and the leftover propolis can then be scraped off easily - this was a tip from another beekeeper that I read in a magazine and it works beautifully :o) It is very effective, and the equipment can just be left to dry in the kitchen sink and then is look as good as new.

Then it was time to go through the hive. First I weighed the hive and it had gained weight for the first time - so the honey collection has started.


The slope on the curve 0.044 kg or 44g corresponds to the average daily loss in mass during the winter. This is almost the same as last year where the daily loss was about 40g

The family is now very big and more than half of the 10 plates in the winter box contained sealed breeding cells. Also pollon was present and almost a full plate with recently harvested honey - the honey cells are a bit darker than the cell from the winter feeding.

Furthermore the edges of some of the breeding plates contained cells for drones. These cells are a bit bigger than the cells for the normal working bees. This means that it is definitely time to insert the drone plate - a plate were the bee can built freely which they will dedicate for drones.

So I removed the plate furthest away from the entrance which was the only one containing winter feeding and it was still almost full and weighing about 2 kg. Then moved two plates containing fresh honey back and inserted the drone plate. Hereafter the 6 plates with the breeding cells were found and finally the plate with pollen by the entrance. This was almost exactly how the hive developed last year

Since the bees already started to collect honey I decided to add a second box today too. I was a bit surprised that the bees were already investigating it less than a hour after I assembled the hive - guess the bees were more than ready for the expansion of their hive.



I all looks great. Unfortunately I did not find the queen, but judging from the size of the hive, she must be doing fine.

Thursday, 2 April 2015

2014 batch 2: Currant mead (13) - Not quite ready for bottling yet

The currant mead has now been standing for quite a while, and from several samples it looks clear. I decided to transfer it to a final glass fermenter from which I will bottle the mead.

I used my electric pump for the transferring which went well, but I was surprised to see how dark it actually is. I was expecting it to be more like a brownish rosé wine, but instead it was almost pitch black

After the transferring was completed, I added 5 L CO2 with my CO2 generator, to be to minimize the risk of oxidation now that the mead has been stirred up. 


Interestingly the mead take up some CO2 which can be seen on the airlock which shows a slight vacuum. 


Now, it the mead ready for bottling? I am not sure. I tried to shine a LED flash light through it to get an impression of the clarity, and it still does not look ready. 


And this is how the light looks through the flask...


It still looks slightly unclear, but perhaps I just need a stronger light source (?).

I will check up on the mead periodically to see if the clarity changes. 

Tuesday, 31 March 2015

2014 batch 1: Cyser (10) - Bottling of the Capsi-Cyser

It has been a while since I have been writing, and in the mean time my mead has been standing in the corner of the kitchen maturing. After tasting the Cyser and evaluating the clarity visually I was certain that it was time to bottle the mead.

Monday I lifted the fermenter up on the kitchen table and tilted it a bit. I added 5L of CO2 to ensure that the mead was saturated. Then I let it rest until the next day. Later Monday, I sterilized all the bottles I needed for the racking plus a bit extra just in case any of the bottles were damaged.


Today it was time. Gathering all needed equipment on the table and I was ready to go. The mead looks so tempting with a slightly dark yellow color. All bottles were filled next to my reference bottle containing exactly 500 g of water, i.e. 0.50L. You see it to the right in the picture.


Filling the bottles took some time but it is so rewarding to se the final product take shape. When the pleasant smell of apple hit the room I felt sure that this is going to be a great mead.

Then it was time to add the chilies. I have not been able to get my hand on more Birds Eye chili, but instead I found "Red chili" from the same region. According to the sales person they were a bit less strong but with more taste. My own tongue could not pick up the difference, so I added the same amount of chili as I would with the Birds Eye - ½ chili without seeds to 0.5L


Bad experiences has taught me to use plastic gloves when handling more than just one chili :o), but I could still feel the tingling of the chili in the nose. Finally ½ a chili was added and the screw cap tightened.

Now it was time to make the bottles look good. I bought black bottle crimp tops to "hide" the silver screw cap. I was very surprised to learn how easy they are to put on:

First you need a tool to hold the crimp top in place. No proper tools were available, so I bent a knife for the purpose (ssshhh don't tell the wife...). Then a glove to protect the hand.


The process is quite easy. Just keep a pot of water boiling lightly. Hold the crimp top in place with the knife and just dip the top of the bottle shortly in the water (1 sec) - and voila - you are done.


Then the bottles were cleaned and finally the label was added. This is a home printed label but next year I will be ready with some more pro-looking labels. Never the less, I like the rough look to the bottle with the chili swimming around - it is very presentable.


Can't wait till my next bottling :o)